The forecast for the next couple days is for sort of rain/snow so we put out all the tarps on Friday (last years post, here, covers all the basics if you itching for more info). My plan was to purchase a new impermeable for #7 as well as more of the Enkamat to be used under both #7 and #15 tarps but weak numbers for September put the brakes on purchasing. I did get two roll of Enkamat to use on #7 but had to stick with the ripped up tarp. We didn't roll out the Enkamat mostly because of time constraints but I am pretty sure we'll have time since there is a history of the first snow fall usually melting. With no Enkamat available for #15 we'll go with what we've always done (a single impermeable tarp) and hope for the best. One more point about #15 green. It is kind of unique because of the large hill along the right side of the green. During spring melt and even ill timed rain events during the winter water will run on the green from the hill. We cut one edge of the tarp into the hillside to prevent moisture from running under the tarp and creating an ice layer directly in the surface. We've done this for years and seldom has ice of any amount developed on the green surface.
The slope is huge PITA when we blow snow because we have to blow the snow in one direction and because of the size of the green we usually end up blowing 1/2 the snow twice, if you follow me. I am getting ahead of myself so I'll wrap up with a video of the cutting the beetle tree down on the right of 9 green.